Distance Sensing Cruise Control Module Replacement. Cadillac DTS 2006

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2006 🢒 DTS 🢒 Accessories 🢒 Cruise Control 🢒 Distance Sensing Cruise Control Module Replacement

Callout	Component Name
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Refer to Control Module References for replacement and setup information.
1	Module Assembly, Cruise Control Tip Loosen the bolts that hold the cruise control module into the T-slots on the tie bar. Disconnect the electrical connector. Slide the module out of the T-slots on the bracket. Replace the module by sliding the assembly into the T-slots on the bracket and tighten. Mandatory tightening sequence. Verify proper alignment of the module. Refer to Distance Sensing Cruise Control Aiming . Tighten 9 N·m (80 lb in)

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Refer to Control Module References for replacement and setup information.

Module Assembly, Cruise Control

Tip

Loosen the bolts that hold the cruise control module into the T-slots on the tie bar.
Disconnect the electrical connector.
Slide the module out of the T-slots on the bracket.
Replace the module by sliding the assembly into the T-slots on the bracket and tighten.

Mandatory tightening sequence.

Verify proper alignment of the module. Refer to Distance Sensing Cruise Control Aiming .

Tighten
9 N·m (80 lb in)