Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the rear seat back cushion. Refer to Rear Seat Back Replacement .
2. Remove the rear seat armrest. Refer to Rear Seat Armrest Replacement .
3. Remove the rear seat back cushion cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement .

Refer to Control Module References for replacement and setup information.

1

Rear Seat Heater Control Module Screws (Qty: 2)

Tighten
2 N·m (18 lb in)

2

Rear Seat Heater Control Module

Tip
Disconnect the electrical connector.