GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1671970  Size: SH
  1. Remove the rear compartment liner. Refer to Rear Compartment Liner Replacement .
  2. Remove the fuel sender access hole cover bolts.
  3. Remove the fuel sender access hole cover.

  4. Object Number: 1671971  Size: SH
  5. Disconnect the fuel level sensor wiring harness electrical connector (1) fuel tank pressure sensor.
  6. Remove the fuel tank pressure sensor.

Installation Procedure


    Object Number: 1671971  Size: SH
  1. Install the fuel tank pressure sensor.
  2. Connect the fuel level sensor wiring harness electrical connector (1) to the fuel tank pressure sensor.

  3. Object Number: 1671970  Size: SH
  4. place the fuel sender access hole cover into position.
  5. Notice: Refer to Fastener Notice in the Preface section.

  6. Install the fuel sender access hole cover bolts.
  7. Tighten
    Tighten the bolts to 2 N·m (18 lb in).

  8. Install the rear compartment liner. Refer to Rear Compartment Liner Replacement .