If the remote control door lock receiver is replaced, the following procedures must be performed:

1. RCDLR Programming -- Refer to Service Programming System (SPS)
2. Keyless Entry Transmitter Programming -- Refer to Transmitter Programming
3. Tire Type Setup:

3.1.	Install a scan tool

3.2.	Select Remote Control Door Lock Receiver under Module Setup in the Vehicle Control System menu.

3.3.	Select Tire Type/Pressure Selection.

3.4.	Follow the on-sceen instructions.

4. Tire Pressure Monitoring Sensor Learn -- Refer to Tire Pressure Sensor Learn

If a keyless entry transmitter is replaced, the following procedure must be performed:

Keyless Entry Transmitter Programming--Refer to Transmitter Programming .