Tools Required

J 39694 Spring Compressor

1. Remove the spiral snap ring (519). Discard the snap ring, which is not reusable.
2. Remove the following parts:

•	The sprag clutch retainer (518)

•	The second sprag outer race

•	The second sprag clutch (516-517)

•	The second sprag outer race thrust washer (520)





Important: Some models will have a reverse clutch pack consisting of a belleville plate (514), three steel plates (511), three fiber clutch plate assemblies (513) and a backing plate (512) with identification marks of A, B or C.

Some models will have a reverse clutch pack consisting of a waved plate (514), two steel plates (511), two fiber clutch plate assemblies (513) and a backing plate (512) with identification marks of 1, 2 or 3.
3. Remove the following parts:

•	The reverse clutch snap ring (515)

•	The reverse clutch backing plate (512)

•	All of the fiber (513) and steel (511) clutch plates

•	The reverse clutch belleville plate (514)




4. Install the J 39694 spring compressor and compress the spring and retainer assembly (509). Then remove the snap ring (510).



5. Remove the following parts:

•	The snap ring retainer (509)

•	The spring and retainer assembly (508)

•	The piston assembly (505)