GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 785802  Size: SH

    Caution: Turn OFF the ignition before inserting fingers into the throttle bore. Unexpected movement of the throttle blade could cause personal injury.

  1. Disconnect the air intake ducts from the throttle body.
  2. Inspect the throttle body bore and the throttle valve plate for any deposits. It is necessary to open the throttle valve in order to inspect all of the surfaces.
  3. Notice: Do not use any solvent that contains Methyl Ethyl Ketone (MEK). This solvent may damage fuel system components.

  4. Clean the throttle body bore and the throttle valve plate by using a clean shop towel with Top Engine Cleaner, GM P/N 1052626 (Canadian P/N 993026) or AC-Delco Carburetor Tune-Up Conditioner, P/N X66-P, or an equivalent product.

Installation Procedure


    Object Number: 785802  Size: SH
  1. Connect the air intake ducts to the throttle body.
  2. Inspect for air leaks.