GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 CTS 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Side Door Window Inner Sealing Strip Replacement

Removal Procedure

    Object Number: 758767 Size: SH
  1. Lower the window to the full down position.
  2. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  3. Starting at the forward end of the inner belt sealing strip, pull upward to release the strip.

Installation Procedure

    Object Number: 428713 Size: SH

    Important: When reusing the inner belt sealing strip, the flange mounting area must be pinched together in order to counteract the splaying effect when removed. Use a thumb and an index finger to pinch the carrier (3) back together.

  1. Work from one end of the sealing strip to the other.

    2. Object Number: 758767 Size: SH
  2. Position the inner belt sealing strip over the flange of the door inner panel.

    3. Important: Do not distort the seal strip.

  3. Adjust seal strip gap (a) at the division post to 1.0 mm (0.04 in) maximum.
  4. Press downward to engage the sealing strip the entire length of the door.
  5. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .