GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 704583  Size: SH
  1. Remove the right rear sail panel. Refer to Sail Panel Replacement .
  2. Remove the fasteners (2) securing the amplifier (1) to the sail panel.
  3. Disconnect the coaxial cable.
  4. Disconnect the electrical connector.

Installation Procedure


    Object Number: 704583  Size: SH

    Important: Ensure that the module coaxial cable connectors are pointing away from each other.

  1. Reconnect the electrical connector.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the amplifier (1) to the sail panel using the fasteners (2).
  4. Tighten
    Tighten the fasteners to 9 N·m (80 lb in).

  5. Connect the coaxial cable to the amplifier.
  6. Reinstall the sail panel trim. Refer to Sail Panel Replacement .