Important: For manual transmission applications, note the position and direction of the engine flywheel before removal. The flywheel does not use a locating pin for alignment. Mark or scribe the end of the crankshaft and the flywheel before component removal. The engine flywheel must be reinstalled to the original position and direction. The engine flywheel will not initially seat against the crankshaft flange, but will be pulled onto the crankshaft by the engine flywheel bolts. This procedure requires a 3-stage tightening process.

1. Remove the transmission. Refer to Transmission Replacement .
2. Remove the clutch assembly (3, 4). Refer to Clutch Assembly Replacement .



3. Mark or scribe the end of the crankshaft and the flywheel.



4. Remove the engine flywheel. Refer to Engine Flywheel Removal .
5. Clean and inspect the engine flywheel. Refer to Engine Flywheel Cleaning and Inspection .

Important: For manual transmission applications, note the position and direction of the engine flywheel before removal. The flywheel does not use a locating pin for alignment. Mark or scribe the end of the crankshaft and the flywheel before component removal. The engine flywheel must be reinstalled to the original position and direction. The engine flywheel will not initially seat against the crankshaft flange, but will be pulled onto the crankshaft by the engine flywheel bolts. This procedure requires a 3-stage tightening process.

1. Align the mark or scribe on the crankshaft with the mark or scribe on the existing flywheel.
2. If installing a new flywheel, refer to Engine Balancing .



3. Install the engine flywheel. Refer to Engine Flywheel Installation .



4. Install the clutch assembly (3, 4). Refer to Clutch Assembly Replacement .
5. Install the transmission. Refer to Transmission Replacement .