GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 CTS 🢒 Engine 🢒 Engine Controls and Fuel - 2.8L 🢒 Camshaft Position Actuator Replacement - Bank 1 (Right Side) Intake

Removal Procedure

    Object Number: 1858800 Size: SH
  1. Remove the right exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 1 (Right Side) Exhaust .
  2. Remove the intake camshaft position actuator bolt.
  3. Remove the right intake camshaft position actuator.

Installation Procedure

    Object Number: 1858800 Size: SH
  1. Locate the intake camshaft position actuator to the camshaft and loosely install the bolt.

    2. Notice: Refer to Torque Reaction Against Timing Drive Chain Notice in the Preface section.

    Important: Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.

  2. Tighten the camshaft position actuator bolt. Refer to Camshaft Position Actuator Installation - Right Side Intake .
  3. Install the right exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 1 (Right Side) Exhaust .