GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 CTS 🢒 Body 🢒 Seats 🢒 Front Seat Horizontal Adjuster Position Sensor Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Disable the SIR system. Refer to SIR Disabling and Enabling or to SIR Disabling and Enabling in SIR.
  2. Remove the seat cushion to gain access to the horizontal seat adjuster motor. Refer to Front Seat Cushion Replacement .
  3. Disconnect the electrical connectors from the motor.

    4. Object Number: 792273 Size: SH
  4. Remove the seat adjuster drive cable (1) by pulling the cable out of the motor.
  5. Remove the sensor from the motor.

Installation Procedure
  1. Install the sensor to the motor.
  2. Line up the square end of the cable with the motor.

    3. Object Number: 792273 Size: SH
  3. Install the long drive cable (1) into the motor.
  4. Install the long cable into the seat adjuster.
  5. Ensure that the cable is fully seated.
  6. Connect the electrical connectors.
  7. Install the seat cushion. Refer to Front Seat Cushion Replacement .
  8. Enable the SIR system. Refer to SIR Disabling and Enabling or to SIR Disabling and Enabling in SIR.
  9. Calibrate the seat. Refer to Memory Seat Calibration .