Removal Procedure
- Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
- Remove the rear seat back. Refer to Rear Seat Back Replacement .
- Remove the rear seat shoulder belt to the floor pan fastener.
- Remove the rear trim shelf panel. Refer to Rear Window Shelf Trim Panel Replacement .
- Remove the sail panel. Refer to Sail Panel Replacement .
- Remove the seat belt retractor fastener (2).
- Remove the seat belt retractor (1).
Caution: Refer to SIR Caution in the Preface section.
Installation Procedure
- Install the rear shoulder belt retractor (1). Engage the tab on the retractor (1).
- Install the seat belt retractor fastener (2).
- Route the shoulder belt through the sail panel and verify that it is not twisted.
- Install the shoulder belt fastener.
- Install the sail panel. Refer to Sail Panel Replacement .
- Install the rear trim shelf panel. Refer to Rear Window Shelf Trim Panel Replacement .
- Install the rear seat back. Refer to Rear Seat Back Replacement .
- Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the rear seat retractor fastener to 30 N·m (22 lb ft).
Tighten
Tighten the shoulder bolt fastener to 30 N·m (22 lb ft).
