GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 CTS 🢒 Body 🢒 Lighting Systems 🢒 Front Fog Lamp Replacement

Removal Procedure
  1. Remove the front air deflector. Refer to Front Air Deflector Replacement in Body Front End.

    2. Object Number: 792092 Size: SH
  2. Disconnect the electrical connector (1).
  3. Remove the fasteners that secure the front fog lamp assembly to the front fascia.
  4. Remove the front fog lamp assembly from the vehicle.

Installation Procedure

    Object Number: 792092 Size: SH
  1. Install the front fog lamp assembly from the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the fasteners to secure the front fog lamp assembly to the front fascia.

    3. Tighten
    Tighten the fog lamp fasteners to 2 N·m (18 lb in).

  3. Connect the electrical connector (1) to the fog lamp assembly.
  4. Install the front air deflector. Refer to Front Air Deflector Replacement in Body Front End.