GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 754073  Size: SH
  1. Insert a flat-bladed tool under the front edge of the front door switch.
  2. Push the tool firmly towards the switch to disengage the retainer.
  3. Lift up on the rear of the switch plate to remove it from the door trim panel.
  4. Disconnect electrical connectors.

  5. Object Number: 754069  Size: SH
  6. Remove the appropriate switch from the bezel by disengaging the side snap walls with a small flat-bladed tool.

Installation Procedure


    Object Number: 754071  Size: SH
  1. Snap the switch into the bezel.
  2. Connect the electrical connectors.
  3. Install the switch into the door trim panel.
  4. Engage the rear of the switch to the door panel.

  5. Object Number: 754068  Size: SH
  6. Press down on the switch plate evenly to engage the retainer.