GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 CTS 🢒 Body 🢒 Doors 🢒 Rear Door Frame Applique Replacement

Removal Procedure
  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the window outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  3. Remove the inner window seal. Refer to Rear Side Door Window Inner Weatherstrip Replacement .

    4. Object Number: 430558 Size: SH
  4. Grasp the front, lower end of the window weatherstrip (3) and pull the weatherstrip (3) out of the door frame, far enough to reveal the door applique screws.

    5. Object Number: 758965 Size: SH
  5. Remove the applique screws.
  6. Slide the applique downward into the door.
  7. Tilt the upper end of the applique outward, then lift to remove.

Installation Procedure

    Object Number: 758965 Size: SH
  1. Slide the door applique up under the auxiliary weatherstrip and rearward over the door frame.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the door applique screws.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 489783 Size: SH

    Important: When reusing the window weatherstrip, the flange mounting area (1) must be pinched together in order to counteract the splaying effect when removed. Use a thumb and an index finger in order to pinch the carrier (2) back together. Work from one end of the weatherstrip to the other.

  3. Install the front portion of the window weatherstrip.
  4. Install the inner window seal. Refer to Rear Side Door Window Inner Weatherstrip Replacement .
  5. Install the window outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  6. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .