GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 CTS 🢒 Body 🢒 Doors 🢒 Door Control Module Replacement

Removal Procedure

    Important: This vehicle is equipped with express up, torque sensitive window on the front door windows.

    When the battery or the power has been removed from the front door module, the front door module will need to be reprogrammed after power is restored and all repairs are completed.

  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement or Front Side Door Trim Panel Replacement .

    2. Object Number: 754067 Size: SH
  2. Remove the door control module (1) by releasing the retainer tabs (2).

    3. Object Number: 754066 Size: SH
  3. Disconnect the electrical connectors (1) from the control module (2).

Installation Procedure

    Object Number: 754066 Size: SH
  1. Connect the electrical connectors (1) to the control module (2).

    2. Object Number: 754067 Size: SH
  2. Snap the door module (1) onto the mounting studs (2).
  3. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement or Front Side Door Trim Panel Replacement .
  4. Reprogram the front door module. Refer to Window Motor Programming - Express Function .
  5. Refer to Control Module References for programming and setup information.