For 1990-2009 cars only
- Ensure that the right camshaft intermediate drive chain idler (1) is being installed. The recessed hub (4) and the smaller sprocket of the right camshaft intermediate drive chain idler is installed outward. The raised hub and the larger sprocket of the right camshaft intermediate drive chain idler is installed towards the block.
- Install the right camshaft intermediate drive chain idler.
- Install the camshaft intermediate drive chain idler bolt.
Important: Some models use a second design inverted tooth timing drive system. The second design drive system can be used in place of the first design roller timing system but all of the following components must be changed to the
second design:
• Primary timing drive chain • Crankshaft sprocket
Refer to
Camshaft Timing Drive Design Identification
• Intermediate drive shaft idler left and right
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the camshaft intermediate drive chain idler bolt to 58 N·m (43 lb ft).
