GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 CTS 🢒 Engine 🢒 Engine Mechanical - 2.8L (LP1) 🢒 Camshaft Position Actuator Replacement - Bank 2 (Left Side) Intake

Removal Procedure

    Object Number: 1858799 Size: SH
  1. Remove the left exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 2 (Left Side) Exhaust .
  2. Remove the intake camshaft position actuator bolt.
  3. Remove the left intake camshaft position actuator.

Installation Procedure

    Object Number: 1858799 Size: SH
  1. Locate the intake camshaft position actuator to the camshaft and loosely install the bolt.

    2. Notice: Refer to Torque Reaction Against Timing Drive Chain Notice in the Preface section.

    Important: Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.

  2. Tighten the camshaft position actuator bolt. Refer to Camshaft Position Actuator Installation - Left Side Intake .
  3. Install the left exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 2 (Left Side) Exhaust .