GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2004 🢒 CTS 🢒 Engine 🢒 Engine Electrical 🢒 Dash Integration Module Replacement

Removal Procedure

    Object Number: 713948 Size: SH
  1. Remove the I/P closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  2. Disconnect the closeout panel light electrical connector (1).
  3. Remove the screws securing the dash integration module (DIM) to the I/P.
  4. Disconnect the electrical connectors.

Installation Procedure

    Object Number: 713948 Size: SH
  1. Connect the electrical connectors to the DIM.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screws securing the DIM top the I/P.

    3. Tighten
    Tighten the screws to 2 N·m (80 lb in).

  3. Connect the closeout panel light electrical connector (1).
  4. Install the I/P closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  5. Program the module. Refer to Body Control Module (BCM) Programming/RPO Configuration .