The power window system consists of the following components:

The power windows system can be controlled by a power window up or down switch activation.

When the ignition switch is in the RUN or ACCY position, or retained accessory power (RAP) is enabled and the driver window switch is pressed in the down position, battery positive voltage is applied to the window motor causing the window to open. When the driver window switch is pressed in the up position, voltage is applied to the window motor in the opposite direction and the window closes.

The driver window switch also controls the front passenger window.

The LF driver window will travel to the fully down position when the driver window switch is pressed past the first detent. Pressing the driver window switch to the up position will cancel the express down feature.

When the ignition switch is in the RUN position and the front passenger window switch is pressed in the down position, voltage is applied to the window motor causing that window to open. When the front passenger window switch is pressed in the up position, voltage is applied to the window motor in the opposite direction causing that window to close.