GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1530697  Size: SH
  1. Remove the courtesy lamp lens.
  2. Remove the overhead console screw.
  3. Grasp the overhead console and pull downward in order to disengage the fasteners.
  4. Disconnect the electrical connectors from the overhead console.

  5. Object Number: 1530702  Size: SH
  6. Remove the power sliding door on/off multifunction switch (5) by using pliers in order to compress the retainers while pulling the switch away from the housing.

Installation Procedure


    Object Number: 1530702  Size: SH
  1. Snap the power sliding door on/off multifunction switch (5) into the opening in the overhead console.

  2. Object Number: 1530697  Size: SH
  3. Connect the electrical connectors.
  4. Align the overhead console within the vehicle.
  5. Press up on the overhead console engaging the fasteners in order to secure the console to the vehicle.
  6. Notice: Refer to Fastener Notice in the Preface section.

  7. Install the overhead console screw.
  8. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  9. Install the courtesy lamp lens.