Automatic Level Control Sensor Link Ball Stud Replacement Twist Axle

1. Remove the ELC/TRAILER fuse.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .




Important: When removing the link, do NOT bend or break the sensor arm.

3. Remove the automatic level control sensor link from the rear suspension ball stud.
4. Remove the ball stud from the rear suspension.

Notice: Refer to Fastener Notice in the Preface section.

1. Install the ball stud to the rear suspension.

Tighten
Tighten the height sensor ball stud to 12 N·m (106 lb in).

2. Install the automatic level control sensor link to the rear suspension ball stud.
3. Lower the vehicle.
4. Install the ELC/TRAILER fuse.

Automatic Level Control Sensor Link Ball Stud Replacement IRS

1. Remove the ELC/TRAILER fuse.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .




Important: When removing the link, do NOT bend or break the sensor arm.

3. Remove the automatic level control sensor link (1) from the ball stud.
4. Remove the ball stud (2) from the control arm.

1. Install the ball stud (2) to the control arm.

Tighten
Tighten the ball stud to 12 N·m (106 lb in).

2. Install the automatic level control sensor link (1) to the ball stud.
3. Lower the vehicle.
4. Install the ELC/TRAILER fuse.