Automatic Level Control Sensor Link Replacement Twist Axle

1. Remove the ELC/TRAILER fuse.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .




Important: When removing the link, do NOT bend or break the sensor arm.

3. Remove the automatic level control sensor link from the sensor arm ball stud.
4. Remove the automatic level control sensor link from the rear suspension ball stud.

1. Install the automatic level control sensor link to the rear suspension ball stud
2. Install the automatic level control sensor link to the sensor arm ball stud.
3. Lower the vehicle.
4. Install the ELC/TRAILER fuse.

Automatic Level Control Sensor Link Replacement IRS

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



2. Remove the ELC sensor link (1) from the ball studs on the sensor and control arm.

1. Position the ELC sensor link (1) to the ball studs on the sensor and control arm.
2. Press the ELC sensor link ends onto the ball studs until fully seated.
3. Lower the vehicle.