GM Service Manual Online
For 1990-2009 cars only

Tools Required

J 38778 Door Trim Pad Clip Remover

Removal Procedure

  1. Remove the sliding door garnish molding. Refer to Rear Side Door Garnish Molding Replacement in Interior Trim.
  2. Remove the sliding door inside handle. Refer to Sliding Door Inside Handle Replacement .
  3. Remove the screw at the bottom rear of the trim panel.
  4. Use the J 38778 to disengage the retainers.

  5. Object Number: 319819  Size: SH
  6. Remove the sliding door inner trim panel from the sliding door.

Installation Procedure


    Object Number: 319819  Size: SH
  1. Install the sliding door inner trim panel to the sliding door.
  2. Align the locating pins on the sliding door inner trim panel to the sliding door.
  3. Firmly press the sliding door inner trim panel with the retainers to the sliding door to the seat retainers.
  4. Install the screw in the bottom rear of the door panel.
  5. Install the sliding door inside handle. Refer to Sliding Door Inside Handle Replacement .
  6. Install the sliding door garnish molding. Refer to Rear Side Door Garnish Molding Replacement in Interior Trim.