Caution: Refer to Battery Disconnect Caution in the Preface section.

1. Record all of the customer's radio station presets.
2. Turn OFF all the lamps and accessories.
3. Turn the ignition OFF.
4. Loosen the negative battery cable bolt at the battery.
5. Remove the negative battery cable (1) from the battery.

Important: Clean any existing corrosion from the battery terminal and the battery cable end.

1. Install the negative battery cable (1) to the battery.

Notice: Refer to Fastener Notice in the Preface section.

2. Tighten the negative battery cable bolt at the battery.

Tighten
Tighten the bolt to 16 N·m (12 lb ft).

3. Reset all of the customer's radio station presets.