For 1990-2009 cars only
Removal Procedure
- Use a small flat-bladed tool to disengage the retainer clips located at the front and rear of the power sunroof switch. Hold the flat-bladed tool parallel to the roof and push straight in.
- Rotate the power sunroof switch toward the left side to disengage the retainer clips from the mounting bracket and pull down.
- Disconnect the electrical connector from the power sunroof switch.
- Remove the power sunroof switch from the bezel.
Installation Procedure
- Install the power sunroof switch to the bezel, pressing until fully seated.
- Connect the electrical connector to the power sunroof switch.
- Install the power sunroof switch to the roof, pressing into place until fully seated.
