GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Turn the ignition OFF.

  2. Object Number: 1394061  Size: SH

    Important: Do not disconnect the power steering fluid lines/hoses from the reservoir.

  3. Remove the camshaft position (CMP) sensor electrical connector (2).

  4. Object Number: 1395986  Size: SH
  5. Disconnect the CMP sensor bolt.
  6. Remove the CMP sensor.

Installation Procedure


    Object Number: 1395986  Size: SH
  1. Install the CMP sensor.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the CMP sensor bolt.
  4. Tighten
    Tighten the CMP sensor bolt to 10 N·m (89 lb in).


    Object Number: 1394061  Size: SH
  5. Connect the CMP sensor electrical connector (2).