For 1990-2009 cars only
- Inspect the output shaft (510) for:
- Affix the outboard drive shaft retaining ring (509) and the inboard drive shaft retaining ring (509) onto the output shaft (510).
- Rotate the transmission so that the oil pan flange faces downward.
- Carefully install the output shaft (510) into the transmission. Extend the shaft through the differential side gear.
| • | Damaged bushing journals |
| • | Stripped splines |
| • | Snap ring groove damage |
Notice: Do not push to hard during installation of the output shaft (510), or damage to the bushings or bearings may occur.
Important: The output shaft (510) must be installed with the short splines toward the final drive assembly.
