GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2002 🢒 Rendezvous - FWD 🢒 Brakes 🢒 Antilock Brake System 🢒 Electronic Traction Control Switch Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement or Instrument Panel Cluster Trim Plate Bezel Replacement.

    2. Object Number: 318109 Size: SH
  2. Remove the bolts/screws from the switch bank to I/P.
  3. Pull straight out from the I/P in order to remove the switch bank from the I/P.

    4. Object Number: 318110 Size: SH
  4. Disconnect the electrical connectors.

Installation Procedure

    Object Number: 318110 Size: SH
  1. Connect the electrical connectors.
  2. Push in on the switch bank in order to install the switch bank.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 318109 Size: SH
  3. Install the bolts/screws to the switch bank to I/P.

    4. Tighten
    Tighten the bolts/screws to 2.5 N·m (22 lb in).

  4. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement or Instrument Panel Cluster Trim Plate Bezel Replacement.