Tools Required

J 43442 Flywheel Holder

1. Remove the automatic transaxle. Refer to Transmission Replacement .
2. Use the J 43442 to secure the flywheel in order to prevent the crankshaft from rotating.



3. Remove the flywheel bolts.
4. Remove the flywheel.

1. Position the flywheel.
2. Install the flywheel bolts until snug.
3. Use the J 43442 to secure the flywheel in order to prevent the crankshaft from rotating.

Notice: Refer to Fastener Notice in the Preface section.




4. Tighten the flywheel bolts.

Tighten
Tighten the bolts to 71 N·m (52 lb ft).

5. Install the automatic transaxle. Refer to Transmission Replacement .