GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Position the sunroof to the fully closed position.
  2. Remove the headliner. Refer to Headlining Trim Panel Replacement.

  3. Object Number: 548330  Size: SH
  4. Remove the sunroof control module from the sunroof module by sliding the control module towards the center of the vehicle.

  5. Object Number: 791680  Size: SH
  6. Disconnect the electrical connectors from the sunroof control module.
  7. Remove the control module from the vehicle.

Installation Procedure


    Object Number: 791684  Size: SH
  1. Connect the electrical connectors to the sunroof control module.
  2. Position the control module retainer tabs to the slots in the sunroof module.

  3. Object Number: 548333  Size: SH
  4. Install the control module to the sunroof module by sliding the control module to the right, pressing into place until fully seated.
  5. Inspect for the proper operation of the sunroof.
  6. Install the headliner. Refer to Headlining Trim Panel Replacement.
  7. Refer to Control Module References for programming and setup information.