GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement.

  2. Object Number: 629215  Size: SH
  3. Disconnect the remote control door lock receiver electrical connector (1).
  4. Important: Disengage the remote control door lock receiver retainers and lift upward.

  5. Remove the remote control door lock receiver (2) from the defroster air duct.

Installation Procedure


    Object Number: 629215  Size: SH

    Important: Position the remote control door lock receiver to the defroster air duct.

  1. Install the remote control door lock receiver (2).
  2. Engage the remote control door lock receiver retainers.
  3. Connect the remote control door lock receiver electrical connector (1).
  4. Install the upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement.
  5. If a new remote control door lock receiver is being installed, program the transmitter. Refer to Control Module References for programming and setup information.