GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Turn the ignition OFF.
  2. Remove the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .

  3. Object Number: 1394050  Size: SH
  4. Remove the throttle body electrical connector.

  5. Object Number: 1401469  Size: SH
  6. Remove the throttle body bolts.
  7. Remove the throttle body and gasket.

Installation Procedure

  1. Carefully clean the throttle body mounting surfaces of any gasket and/or seal material.

  2. Object Number: 1401469  Size: SH
  3. Install the throttle body and NEW gasket.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the throttle body bolts.
  6. Tighten
    Tighten the throttle body bolts to 10 N·m (89 lb in).


    Object Number: 1394050  Size: SH
  7. Install the throttle body electrical connector.
  8. Install the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .
  9. Perform the idle learn procedure. Refer to Idle Learn .
  10. Use the scan tool to clear all DTCs.