Caution: Refer to Brake Fluid Irritant Caution in the Preface section.

Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in the Preface section.

Important: Note the locations of the brake pipes in order to aid in installation.




1. Disconnect the brake pipes from the proportioning valve .



2. Remove master cylinder brake pipes (1) from proportioning valve.
3. Remove the nuts that retain the proportioning valve to the mounting bracket.
4. Remove the proportioning valve from the bracket.

Notice: Refer to Fastener Notice in the Preface section.

1. Install the proportioning valve to bracket and install retaining nuts.

Tighten
Tighten the nuts 10 N·m (84 lb in).




2. Install master cylinder brake pipes (1) to proportioning valve .

Tighten
Tighten the fittings to 15 N·m (11 lb ft).




3. Install the brake pipes to the proportioning valve .

Tighten
Tighten the fittings to 21 N·m (15 lb ft).

4. Bleed brake system. Refer to Hydraulic Brake System Bleeding .