Adm Msg - Brake Rotor Minimum Allowable Thickness After Refinish Specification Correction
| Subject: | Brake Rotor Minimum Allowable Thickness After Refinish Specification Correction |
| Models: | 2001-2004 Buick Century, Regal |
| 2002-2004 Buick Rendezvous |
| 2001-2004 Chevrolet Impala, Monte Carlo, Venture |
| 2001-2002 Oldsmobile Intrigue |
| 2001-2004 Oldsmobile Silhouette |
| 2001-2004 Pontiac Aztek, Grand Prix, Montana |
The current 'Rotor Minimum Allowable Thickness After Refinish (MIN THK) Specification' found in past service manual information is incorrect. The correct Minimum Allowable Thickness After Refinish specification shown in the table below should be used to determine the service life of the rotor.
2001-2004 Minimum Allowable Thickness After Refinish Specification (Front Rotors Only)
Aztek, Rendezvous -- 28.4 mm (1.118 in)
Montana, Silhouette, Venture (AWD) -- 28.4 mm (1.118 in)
Montana, Silhouette, Venture (FWD) -- 31.08 mm (1.224 in)
Century, Grand Prix, Impala, Intrigue, Monte Carlo, Regal -- 31.08 mm (1.224 in)
This information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
