For 1990-2009 cars only
Removal Procedure
- Grasp the switch on the left and right sides.
- Use 2 small, flat-bladed tools to disengage the clips which are located at the front and rear of the switch. Hold the flat-bladed tools parallel to the roof and push straight in.
- Rotate the switch toward the left side to disengage it from the mounting bracket and pull down.
- Disconnect the electrical connector from the switch.
- Remove the switch from the vehicle.
Important: The switch must be rotated, pulled down on the left side, to be removed.
Installation Procedure
- Connect the electrical connector to the switch.
- Push the switch into the bracket until fully seated.
