GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Rainier - 2WD 🢒 Body 🢒 Wiring Systems 🢒 Ignition Coil Replacement

Removal Procedure

    Object Number: 344169 Size: SH
  1. Remove the intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
  2. Remove the spark plug wire from the ignition coil.

    3. Object Number: 339299 Size: SH
  3. Disconnect the ignition coil electrical connector.

    4. Object Number: 344167 Size: SH
  4. Remove the ignition coil bolts.

    5. Object Number: 339300 Size: SH
  5. Remove the ignition coil.

Installation Procedure

    Object Number: 339300 Size: SH
  1. Install the ignition coil.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 344167 Size: SH
  2. Install the ignition coil bolts.

    3. Tighten
    Tighten the bolts to 8 N·m (71 lb in).


    Object Number: 339299 Size: SH
  3. Connect the ignition coil electrical connector.

    4. Object Number: 344169 Size: SH
  4. Connect the spark plug wire to the ignition coil.
  5. Install the intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .