Electronic Brake Control Module Programming and Setup. Buick Rainier

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2006 🢒 Rainier - 2WD 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Electronic Brake Control Module Programming and Setup

If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:

•	EBCM Reprogramming--Refer to Service Programming System (SPS) .

•	Revise the tire calibration using the Scan Tool Tire Size calibration function.

•	Revise the yaw rate sensor recalibration using the scan tool yaw rate sensor recalibration function.

If the yaw rate/lateral accelerometer is replaced, the following procedures must be performed:

•	Revise the yaw rate sensor recalibration using the scan tool yaw rate sensor recalibration function.

•	Revise the tire calibration using the Scan Tool Tire Size calibration function.