GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2004 🢒 Park Avenue 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Link Replacement

Removal Procedure

    Object Number: 105020 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the stabilizer shaft link bolt and nut.
  3. Remove the stabilizer shaft link insulator and spacers.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 105020 Size: SH
  1. Install the stabilizer link insulator, spacer, nut and bolt.

    2. Tighten
    Tighten the stabilizer shaft link nut to 13 N·m (10 lb ft).

  2. Lower the vehicle.