For 1990-2009 cars only
Removal Procedure
- Raise the vehicle. Support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Remove the right front fascia extension. Refer to Front Bumper Fascia Extension Replacement in Bumpers.
- Remove the left transaxle mount. Refer to Transmission Mount Replacement - Left Side .
- Remove the four attaching bolts from the side cover.
- Remove the transaxle mount bracket (1) from the vehicle.
Installation Procedure
- Apply thread lock compound GM P/N 12345493 or equivalent, to the left transaxle bracket bolts.
- Install the left transaxle bracket (1) to the case side cover.
- Install the left transaxle mount. Refer to Transmission Mount Replacement - Left Side .
- Install the right front fascia extension. Refer to Front Bumper Fascia Extension Replacement in Bumpers.
- Install the left front tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Lower the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bracket bolts to 110 N·m (81 lb ft).
