Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Did you perform A Diagnostic System Check - Door Systems? | -- | Go to Step 2 | Go to the Diagnostic System Check - Door Systems |
2 | Does the inside rear view mirror electrochromatic system operate? | -- | Go to Step 3 | Go to Symptoms in Stationary Windows |
3 |
Did you find and repair the concern? | -- | Go to Step 12 | Go to Step 4 |
4 |
Is the voltage within the specified range? | 1.2-1.5 V | Go to Step 5 | Go to Step 6 |
5 |
Did you find a concern? | -- | Go to Step 11 | Go to Step 9 |
6 | Inspect for poor connections at the harness connector of the inside rear view mirror. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 7 |
7 | Replace the inside rear view mirror. Refer to Inside Rearview Mirror Replacement in Stationary Windows. Did you complete the replacement? | -- | Go to Step 12 | -- |
8 | Inspect for poor connections at the harness connector of the DDM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 9 |
9 | Inspect for poor connections at the harness connector of the DDM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 10 |
10 | Replace the driver outside rear view mirror. Refer to Power Mirror Replacement . Did you complete the replacement? | -- | Go to Step 12 | -- |
11 | Replace the DDM. Refer to Door Control Module Replacement - Front . Did you complete the replacement? | -- | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |