Step | Action | Yes | No |
---|---|---|---|
1 | Did you Perform the Diagnostic System Check - Power Door Systems? | Go to Step 2 | |
2 |
Does the Mirror Switch parameter change state? | Go to Step 3 | Go to Step 4 |
3 |
Does the Mirror Motor parameter indicate an Output? | Go to Step 6 | Go to Step 5 |
4 | Inspect for poor connections at the harness connector of the driver door switch assembly. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 9 |
5 | Inspect for poor connections at the harness connector of the door module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 8 |
6 | Inspect for poor connections at the harness connector of the inoperative outside rear view mirror. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 7 |
7 | Replace the inoperative outside rear view mirror. Refer to Power Mirror Replacement . Did you complete the replacement? | Go to Step 10 | -- |
8 | Replace the door module of the inoperative mirror. Refer to Front Side Door Window Module Replacement . Did you complete the replacement? | Go to Step 10 | -- |
9 | Replace the driver door switch assembly Refer to Front Door Switch Replacement . Did you complete the replacement? | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |