Did you perform the Remote Keyless Entry Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Remote Keyless Entry

1. With the keyless entry transmitter, attempt to operate the panic function.
2. Observe the operation of the following functions:

•	Courtesy lamps ON

•	Head lamps flash ON and OFF

•	Horns sound ON and OFF

•	Park lamps flash ON and ON

Do all of the functions operate?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Do any of the panic functions operate?

Go to Step 4

Go to Keyless Entry System Inoperative

Did the headlamps operate properly?

Go to Step 5

Go to Step 7

Did the park lamps operate properly?

Go to Step 6

Go to Symptoms in Lighting Systems

Did the courtesy lamps operate properly?

Go to Step 8

Go to Symptoms in Lighting Systems

Operate the headlamps from the headlamp switch.

Do the headlamps operate properly?

Go to Step 9

Go to Symptoms in Lighting Systems

Operate the horns from the horn pad.

Do the horns operate properly?

Go to Step 10

Go to Symptoms in Horns

Test the headlamp alarm signal circuit for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 13

Go to Step 11

Test the horn relay control circuit of the RFA module for an a open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 13

Go to Step 11

Inspect for poor connections at the harness connector of the RFA module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 13

Go to Step 12

Replace the RFA module. Refer to RFA Module Replacement .

Did you complete the replacement?

Go to Step 13

--

Operate the vehicle within the Conditions for Running the symptom.

Does the symptom reoccur?

Go to Step 1

System OK