Crankcase Ventilation System Inspection VIN K

1. Remove the injector sight shield from the fuel rail and intake.



2. Remove the MAP sensor (1).
3. Use a 16 mm socket to press the access cover (2) down and rotate 1/4 turn counterclockwise.
4. Remove the access cover.
5. Remove the PCV valve (3) and the O-ring (4) from the intake manifold.

1. Install the crankcase ventilation valve (3); replace the O-ring (4) if necessary.
2. Install the access cover (2).
3. Install the MAP sensor (1).
4. Install the sight shield.

Crankcase Ventilation System Inspection VIN 1

1. Remove the injector sight shield. Refer to Fuel Injector Sight Shield Replacement .



2. While holding down the crankcase ventilation valve access cover (1), remove the access cover retaining bolts.
3. Remove the crankcase ventilation valve access cover (1).
4. Remove the crankcase ventilation valve (2), spring, and O-ring (3).

1. Install the crankcase ventilation valve (2), spring, and new O-ring (3).
2. Install the crankcase ventilation valve access cover (1).
3. While holding down crankcase ventilation valve access cover, install the access cover retaining bolts.
4. Install the injector sight shield. Refer to Fuel Injector Sight Shield Replacement .