Did you perform the Instrument Cluster Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

1. Turn ON the ignition, with the engine OFF.
2. Install a scan tool.
3. With a scan tool, observe the Left Turn Switch parameter in the IPC data list.

Does the left turn signal input indicate ON?

--

Go to Diagnostic System Check - Lighting Systems in Lighting Systems

Go to Step 3

Replace the instrument panel cluster. Refer to Instrument Cluster Replacement .

Did you complete the replacement?

--

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2