Removal Procedure
- Remove the right IP cluster
trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement - Right Side
in Instrument Panel, Gauges and Console.
- Remove the fasteners (2) that secure the heater and A/C
control.
- Pull the heater and A/C control (1) rearward.
- Disconnect the heater and A/C control electrical connectors.
Installation Procedure
- Connect the heater and A/C control electrical connectors.
- Install the heater and
A/C control (1).
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the heater
and A/C control fasteners (2).
Tighten
Tighten the fasteners to 1.8 N·m (16 lb in).
- Install the right IP cluster trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement - Right Side
in
Instrument Panel, Gauges and Console.