GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 Park Avenue 🢒 Engine 🢒 Engine Controls - 3.8L 🢒 Secondary Air Injection Pump Replacement

Removal Procedure

    Object Number: 507391 Size: SH
  1. Loosen the AIR exhaust pipe (2) hose pinch clamp.
  2. Disconnect the AIR exhaust hose (1) from the AIR pump (3).

    3. Object Number: 507552 Size: SH
  3. Disconnect the AIR pump electrical connector (1).

    4. Object Number: 507391 Size: SH
  4. Remove the three nuts (5) securing AIR pump bracket to transmission mount.
  5. Remove the AIR pump and bracket as an assembly (4).

Installation Procedure

    Object Number: 507391 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Secure the AIR pump and bracket (4) to the transmission mount with the three nuts (5).

    2. Tighten
    Tighten the three nuts securing the AIR pump mounting bracket to 50 N·m (37 lb ft).


    Object Number: 507552 Size: SH
  2. Connect the AIR pump electrical connector (1).

    3. Object Number: 507391 Size: SH
  3. Lightly lubricate inner edge of AIR exhaust hose (1).
  4. Attach the AIR exhaust hose (1) to the AIR pump outlet port (3).
  5. Place the AIR exhaust hose pinch clamp (2) around the AIR pump outlet port and exhaust hose connection.