Removal Procedure
Caution: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a
hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.
- Raise the
vehicle.
- Disconnect the EVAP canister vent valve electrical connector.
- Remove the bolt from the EVAP canister vent valve bracket.
- Loosen the vent hose clamp and remove the vent hose from the EVAP
canister.
- Remove the EVAP canister vent valve from the vehicle.
Installation Procedure
- Install the EVAP canister
vent valve to the chassis.
- Connect the vent hose to the EVAP canister and tighten the hose
clamp.
- Connect the EVAP canister vent valve electrical connector.
- Lower the vehicle.