Drive Belt Tensioner Bracket Replacement L67
Removal Procedure
- Remove the battery. Refer to
Battery Replacement
in Engine Electrical.
- Remove the supercharger drive belt. Refer to
Drive Belt Replacement
.
- Remove the fasteners attaching ignition coils to the drive belt
tensioner bracket.
- Position the ignition coils aside.
- Remove the drive belt
tensioner bracket bolt.
- Remove the drive belt tensioner bracket from the engine.
Installation Procedure
- Install the drive belt
tensioner bracket to the engine.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the drive
belt tensioner bracket bolt.
Tighten
Tighten the bolt to 50 N·m (37 lb ft).
- Position the ignition coils to the drive belt tensioner bracket.
- Install the fasteners attaching ignition coils to the drive belt
tensioner bracket.
Tighten
Tighten the fasteners to 50 N·m (37 lb ft).
- Install the supercharger drive belt. Refer to
Drive Belt Replacement
.
- Install the battery. Refer to
Battery Replacement
in Engine Electrical.