Preliminary Procedures

1. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement .
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .

1

Rear Door Window Motor Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
4.6 N·m (41 lb in)

2

Rear Door Window Motor

Procedure

1. Disconnect the electrical connector.
2. Rotate the regulator as necessary to remove from the door.
3. Install the power window motor. Refer to Window Regulator Motor Programming and Setup .